PRODUCT
ZYSFY-120A High-precision Halogen Fast Moisture Analyzer
ZYSFY-120A High-precision Halogen Fast Moisture Analyzer
The halogen moisture meter is a new type of rapid moisture tester. It adopts ring-shaped halogen lamp heating, intelligent operation. The sample can be dried quickly and uniformly, and accurate moisture measurement results can be obtained. Clear moisture measurement information display can realize intuitive, simple and convenient instrument operation
Use range:
The moisture meter can be widely used in all industries that need to quickly determine moisture to meet the application requirements of various industries, such as plastic, rubber, chemical, pharmaceutical, food, and other industries in the production and experimental process.
ZYSFY-120A technical parameters:
Weighing value 120g
Display division value 0.001g
Readability 0.01%
Weighing sensor German HBM sensor
Processor British ARM
Heating source halogen lamp
Drying method automatic manual timing
Heating method standard, fast and gentle
Stop mode: automatic stop, timer stop, manual
Temperature setting: room temperature-180°C, 1°C increase)
Test data: weight before drying, weight after drying, moisture value, solid content, temperature, test time
Weight calibration 100g weighing pan size φ90 (mm)
Communication interface Standard RS232 communication interface-easy to connect printers, computers and other peripherals
Dimensions 330*205*165 (mm) length, width and height
Packing size 410*315*335 (mm)
Gross weight 4.6kg
Features:
1. No need to install, debug and train, it can be used after unpacking, simple operation, saving tedious steps;
2. The heating is uniform, the measuring time is short, the work efficiency is high, the performance is stable, and the test is accurate;
3. Small size and light weight;
4. Fully automatic measurement, alarm reminder after measurement, no need to watch the measurement process;
5. It has a wide range of uses and is almost suitable for moisture determination in various industries;
6. German imported sensors make the instrument test results more accurate;
7. The unique windshield design makes the instrument weighing system more stable;
8. The water content and solid content of the sample can be converted simultaneously;
9. The heating chamber adopts pure stainless steel chamber cover, which is resistant to high temperature and easy to clean.
Test steps:
1. In the state of 0.000, put the test sample in the sample pan (evenly spread)
2. Close the lid and press Start to start the heating test.
3. After the test, the screen directly displays the moisture content of the sample, press Set to switch various parameters, and then press Start to return to the next sample test.
Test small details:
1. Dry the sample pan before heating
2. The weight of the sample affects the measurement time and the repeatability of the results. It is recommended that the sample weight be about 5-10g
3.After testing a sample, wait for the temperature to drop below 50 degrees before retesting a new sample.
Previous page
1
Next page
Yangzhou Zhengyi Testing Machinery Co., Ltd.
Service Hotline：
Add：
Address: Zhenxing North Road, Zhenwu Town, Jiangdu District, Yangzhou City, Jiangsu Province
Copyright: Yangzhou Zhengyi Testing Machinery Co., Ltd. 苏ICP备14021115号-4 Powered by:www.300.cn