zhengyi
搜索
bb
Number of views:
1000

ZY-500N Mask Tensile Machine

The ZY-500N mask tensile machine is an instrument used to test the mechanical properties of materials such as stretching, peeling, tearing, and H extraction. It is widely used in rubber, plastic, textile, chemical, steel wire, hose tape, wire and cable, plastic, pipe and other industries. It is a high-precision, economical and practical instrument.
Retail price
0.0
Market price
0.0
Number of views:
1000
Product serial number
006
Quantity
-
+
Stock:
0
Product description
Parameters
The ZY-500N mask tensile machine is an instrument used to test the mechanical properties of materials such as stretching, peeling, tearing, and H extraction. It is widely used in rubber, plastic, textile, chemical, steel wire, hose tape, wire and cable, plastic, pipe and other industries. It is a high-precision, economical and practical instrument.
The tensile machine is composed of a host, a speed control system, data acquisition and processing, sensors and electrical interlocking parts. The host includes the fuselage, transmission mechanism, and measurement system. Data processing is handled by a microcomputer processor. This machine uses a stepping speed regulator to change the stretching speed, and the speed value is directly read out. The motor moves the lower gripper (fixture) through the V-belt-worm-screw drive, so as to realize the tensile change of the sample. The head of the main unit is equipped with a tension sensor, and its upper end is connected with the connecting plate of the top beam of the main unit, and the lower end is connected with the upper clamp. The sensor is only subject to vertical tension and is not affected by torsion or directional force to ensure force measurement accuracy. Between the upper and lower grippers, the force of the sample during the test is transformed into an electrical signal through the force sensor and input into the microcomputer acquisition control system. After the test is over, it is automatically processed, automatically calculated, and the result is displayed.
The touch LCD measurement and control system adopts 32-bit ARM technology and DSP high-performance processor control technology. The display part adopts a 7-inch 65K color ultra-clear touch screen with a resolution of 1024*768. The ultra-high performance configuration makes the software function and user experience great improve. The software includes boot animation, main screen display, large curve display, unit setting, multiple test standard selection and result calculation display, equipment status display, hardware parameter setting, equipment calibration, PID parameter setting, custom parameter editing, sample plan Editing, sample size editing, visual printing and other functions, the micro printer supports a variety of models to choose from, and the motor control supports free switching of multiple control methods such as servo, stepping, frequency conversion, and DC (the factory does not need to replace the system, and the standard features).
This test measurement and control system is a high-performance measurement and control instrument designed specifically for electronic testing machines that integrates measurement and control. It can perform tensile, compression, bending, shear, tear, and peel tests. The software can complete the maximum force, maximum deformation, tensile strength, elongation at break, total elongation at maximum force, elongation at yield point, elongation after fracture, upper and lower yield strength, elastic modulus, force at yield point, and elongation at break , Calculation and real-time display of parameters such as elongation at yield point, tensile strength at break, tensile stress at yield point, constant elongation stress, constant elongation (according to user-specified constant force level) and other parameters, among which the level of constant elongation The value and the constant force level value can be entered into the relevant position of the software in the sample parameter interface according to the actual requirements of the customer. The parameters that can be calculated also include compressive strength, upper and lower compression yield strength, compression elastic modulus, bending strength, bending elastic modulus, average bending force, average peel force, peel strength, maximum peel force, minimum peel force, tear strength , Average shear force, shear strength, shear modulus and other mechanical and physical properties related parameters.
 
Main interface function introduction

 

Real-time data display
The system can display 4 channels of data at the same time, namely force value, displacement, deformation, and speed. After the touch screen is powered on, it will automatically collect data and refresh the display. Force resolution 1/250000, accuracy above 0.2%, range 1-999999KN arbitrary; displacement sensor and deformation sensor resolution up to 1um, response frequency 40kHz, range 0~10000 mm can be set arbitrarily, precision instrument system has no error, 4-phase decoding Types of;
Real-time unit switching
Force unit switching (N, KN, g, kg, gf, kgf, Ib, Ibf, oz, ozf), deformation and displacement units switching (mm, cm, m, in), unit switching is set in "Sample Parameters" After the page is completed and the switch is completed, the numerical display on the main interface and the result display data are automatically converted.
Calculation of test results
Depending on the calculation method, the display content of the test result list is automatically switched. After the calculation method is selected, the next time the power is turned on, the calculation method selected last time will be automatically tested.
Real-time curve display
The system provides the main interface with convenient small curve interface display and "single graph" large curve interface display. In the standby state, click "single graph", the system will display the large curve interface, click "back to home page", the system will automatically switch back On the main page of monitoring, the range of two kinds of curve coordinate axes can be set freely according to needs.
Test control button
The touch screen system provides a set of touch screen control buttons for test control, which can help improve the experience of use.
[Run] After the equipment is ready, it is allowed to start the running test (if the equipment has an abnormal prompt, after clicking "Run", the system will sound an alarm for abnormal operation, and the user can follow the prompts to guide and complete the running operation);
【Stop】Stop test or stop beam movement control command;
[Clear] Clear all sensor data (clearing is invalid when the beam is moving, testing, and the force sensor is abnormal, the system will sound an alarm for abnormal operation, and the user can follow the prompts to complete the clearing operation);
[UP move up] Manually move the beam up gradually. Each time you click, the moving speed will continue to increase in the same direction. The moving speed can be modified in the "customized parameters" as needed (beam moving in reverse, test running, upper limit protection , When the force sensor is abnormal, the upward movement is invalid, the system will sound an alarm for abnormal operation, and the user can follow the prompts to complete the upward movement operation);
[DOWN move down] Manually control the beam to move down gradually. Each time you click, the moving speed will continue to increase in the same direction. The moving speed can be modified in the "customized parameters" as needed (beam moving in reverse, test running, lower limit protection , When the force sensor is abnormal, the downward movement is invalid, the system will sound an alarm for abnormal operation, and the user can follow the prompts to complete the downward operation);
[Return to zero force] In the standby state, manually control the unloading. Generally, it is used to automatically release the applied load when the test stops abnormally or the sensor fails. After the load returns to the zero position, the beam will stop automatically, and the automatic unloading can be stopped manually in the middle
 

Test status and abnormal information

 

【▲】Indication of beam moving upwards (the upward moving LED indicator of the button board is on)
[▼] Indication of the downward movement of the beam (the downward movement of the key board LED indicator is on)
[||] In standby mode, the beam stops moving (the LED indicator of the button board does not light up)
[Upper limit reached] Upper limit protection, the system restricts the beam to move up, the beam moves down or manually release the upper limit protection.
[Lower limit to] Lower limit protection, the system restricts the beam to move down, the beam moves up or manually release the lower limit protection.
[Automatic return] After the test is over, the system will perform automatic return according to the program settings, return to the position origin and stop automatically, or manually stop and return. During the automatic return process, it is prohibited to run, clear, move up and down instructions, unload instructions, parameter settings and other instructions ( If there is any abnormal operation, the system will sound an alarm for abnormal operation, and the user can follow the prompts to complete the relevant operation).
[Force over-range] Force over-range protection, sensor failure or afterburner over-range, the system restricts the beam to move up and down, manual troubleshooting or click [force value return to zero] to remove the load abnormality, the alarm is automatically cancelled.
[Displacement over range] Displacement over range protection, the system restricts the beam to move up and down. After confirming that there is no collision, click [Clear] to cancel the alarm. After the exception is removed, the alarm is automatically cancelled.
[Deformation overrange] Deformation overrange protection, the system restricts the beam to move up and down. After confirming that there is no collision, click [Clear] to cancel the alarm. After the abnormality is removed, the alarm is automatically cancelled.
[Preload] After the test starts, the system executes the preload control before the start of the test according to the plan settings. After the preload ends, it automatically enters the running state, and the alarm information is automatically released. The system prohibits abnormal operations during the preload (if there is abnormal operation, The system will sound an alarm for abnormal operation, and the user can follow the prompts to guide and complete related operations)
Main specifications and technical parameters
Executive standard: GB/T16491-2008
Accuracy: within ±1% of indicated value
Power supply: ~220 ±10% V / 50 Hz;
Humidity: 30%-85%;
Instrument fuse: 1A
Stretching speed: 0~500mm/min
Gripper stroke: 800mm
Test force: 500N
Jaw automatic (manual) homing function;
Various limit switches are available, and the force overload protection function can be set;
Various test control methods such as constant speed, constant elongation, constant load, constant speed and positioning shift.
The speed control of this instrument only needs to mark the positioning and displacement directions to automatically control the running speed.
Fault self-checking and prompt function: memory, AD chip, memory chip, CPU program, upper limit protection, lower limit protection and other faults, force sensor is not connected or overloaded, force sensor is not calibrated.
Test data correction function.
We could not find any corresponding parameters, please add them to the properties table

Recommended Products

ZY-2000E Rubber Rotorless Vulcanizer
The ZY-2000E computerized rotorless vulcanizer adopts a computer-controlled imported temperature controller for accurate temperature control. The computer can process data in a timely manner and can perform statistics, analysis, storage and comparison, etc., humanized design, easy operation, accurate data, and optimized formula for rubber Provide accurate data. The buttons of the mouse on the computer of this vulcanizer have the same function as the buttons on the host panel, which is convenient for users to operate. The computer software interface is quite good and it is extremely convenient to use. Users can accurately measure the scorch time, positive vulcanization time, and vulcanization index. , Maximum and minimum torque, etc., is the ideal equipment for rubber industry to control the quality of rubber materials, rapid inspection and rubber extrusion research.
Details 白箭头 黑箭头
Sulfur change meter
1. Introduction: The ZY-2000E rubber vulcanization analyzer adopts a computer-controlled imported temperature controller for temperature control. The computer can process data in a timely manner and can perform statistics, analysis, storage and comparison, etc., humanized design, easy operation, accurate data, and provide accurate rubber formula data. The buttons of the mouse on the computer of this vulcanizer have the same function as the buttons on the host panel, which is convenient for users to operate. The computer software interface is quite good and it is extremely convenient to use. Users can accurately measure the scorch time, positive vulcanization time, and vulcanization index. , Large and small torques, etc. It is an ideal equipment for rubber industry to control the quality of rubber materials, rapid inspection and rubber extrusion research. ZY-2000E Rubber Vulcanometer is a new generation of mechatronics product launched by our factory. It is mainly composed of host, sensor, computer, data collector of lower computer, printer and electric chain. Executive standard: ASTMD5289-95 ISO6502:1991 HG/T3709-2003 Provide vulcanization curve, temperature curve diagram. Single curve test, continuous test of any curve and comparison test of any curve are possible on the same interface, the data is stored in the database, and all curve data can be printed in real time or in history. 2. Technical parameters: Executive standard: GB/T16584, ISO-6502 Cavity structure: fully enclosed Temperature control range: normal temperature -200℃ Temperature fluctuation: ≤±0.1℃ Temperature display resolution: 0.01℃ Torque range: 0-20N.M Torque display accuracy: 0.001 N.M Power supply: 50HZ, ~220V±10% Compressed air: ≥0.40Mpa Swing frequency: 100cpm (1.7HZ) Swing angle: ±0.5. ±1. Torque range: (0-5N.m, 0-10N.m 0-20N.m) automatic Ambient temperature: 0-35°C relative humidity <80% Setting range of vulcanization time: 2-300min, t90 is in the range of 10 seconds to 5 hours. Print content: date, time, temperature, curing curve, temperature curve, ML, MH, ts1, ts2, t10, t90, Vc1 Vc2 Dimensions: 600*700*1250mm 3. Main features: 1. This instrument adopts a truly closed cavity, and its repeatability and test data are comparable to Alpha 2. This instrument is based on a large-scale database development platform, and the temperature control device adopts software to directly control and collect and process. 3. This instrument has the functions of statistics, analysis, storage and comparison. Humanized design, easy to operate. Fourth, the main configuration: 1. The real high-precision closed cavity structure is synchronized with American Alpha. 2. Joint venture high-precision sensor with accuracy of 0.001N.M 3. Japan NSK high-precision bearings. 4. High-performance cylinders of SDPC Group, a Sino-British joint venture. 5. Sino-foreign joint venture Delixi pneumatic components. 6. Special modules with powerful functions, the test data is synchronized with Alpha. 7. The working door automatically rises and falls. 8. The key parts of electronic components adopt military components, with reliable quality and stable performance. 9. The computer software directly controls the temperature, and the accuracy of Alpha technology reaches 0.01℃. 10. 19-inch Lenovo LCD computer, HP color printer. 11. Taiwan built SUNON cooling fan to protect electrical appliances from malfunctioning and truly worry-free.
Details 白箭头 黑箭头
ZY-2000G Mooney Viscometer
ZY-2000G computer Mooney viscometer, measuring and temperature control circuit is composed of measuring and control module, platinum resistance, heater, can automatically track changes in the power grid and ambient temperature, automatically correct PID parameters, to achieve the purpose of rapid and accurate temperature control. The data acquisition system and electromechanical interlock complete the automatic test of the torque signal during the rubber test process, and automatically display the temperature value and set value in real time. After vulcanization, automatic processing, automatic calculation, printing Mooney, scorch curve and process parameters. The computer displays the test process in real time, and the changes of "temperature" and "time-Mooney" can be seen clearly from above. It is an indispensable instrument in the reclaimed rubber, rubber, wire and cable industries.
Details 白箭头 黑箭头
ZY-5000N rubber electronic tensile machine (digital display type)
ZY-5000N rubber electronic tensile machine is an instrument used to test the mechanical properties of materials such as stretching, peeling, tearing, and H extraction. It is widely used in rubber, plastic, textile, chemical, steel wire, hose tape, wire and cable, plastic, pipe and other industries. It is a high-precision, economical and practical instrument. The tensile machine is composed of a host, a speed control system, data acquisition and processing, sensors and electrical interlocking parts. The host includes the fuselage, transmission mechanism, and measurement system. Data processing is handled by a microcomputer processor. This machine uses a stepping speed regulator to change the stretching speed, and the speed value is directly read out. The motor moves the lower gripper (fixture) through the V-belt-worm-screw drive, so as to realize the tensile change of the sample. The head of the main unit is equipped with a tension sensor, and its upper end is connected with the connecting plate of the top beam of the main unit, and the lower end is connected with the upper clamp. The sensor is only subject to vertical tension and is not affected by torsion or directional force to ensure force measurement accuracy. Between the upper and lower grippers, the force of the sample during the test is transformed into an electrical signal through the force sensor and input into the microcomputer acquisition control system. After the test is over, it is automatically processed, automatically calculated, and the result is displayed. The touch LCD measurement and control system adopts 32-bit ARM technology and DSP high-performance processor control technology. The display part adopts a 7-inch 65K color ultra-clear touch screen with a resolution of 1024*768. The ultra-high performance configuration makes the software function and user experience great improve. The software includes boot animation, main screen display, large curve display, unit setting, multiple test standard selection and result calculation display, equipment status display, hardware parameter setting, equipment calibration, PID parameter setting, custom parameter editing, sample plan Editing, sample size editing, visual printing and other functions, the micro printer supports a variety of models to choose from, and the motor control supports free switching of multiple control methods such as servo, stepping, frequency conversion, and DC (the factory does not need to replace the system, and the standard features). This test measurement and control system is a high-performance measurement and control instrument designed specifically for electronic testing machines that integrates measurement and control. It can perform tensile, compression, bending, shear, tear, and peel tests. The software can complete the maximum force, maximum deformation, tensile strength, elongation at break, total elongation at maximum force, elongation at yield point, elongation after fracture, upper and lower yield strength, elastic modulus, force at yield point, and elongation at break , Calculation and real-time display of parameters such as elongation at yield point, tensile strength at break, tensile stress at yield point, constant elongation stress, constant elongation (according to user-specified constant force level) and other parameters, among which the level of constant elongation The value and the constant force level value can be entered into the relevant position of the software in the sample parameter interface according to the actual requirements of the customer. The parameters that can be calculated also include compressive strength, upper and lower compression yield strength, compression elastic modulus, bending strength, bending elastic modulus, average bending force, average peel force, peel strength, maximum peel force, minimum peel force, tear strength , Average shear force, shear strength, shear modulus and other mechanical and physical properties related parameters. Main interface function introduction
Details 白箭头 黑箭头
ZY-5000N Rubber Electronic Tension Machine
ZY series electronic tensile machine can be used for rubber, plastic, foam material, plastic, film, textile, fiber, polymer material, composite material, synthetic material, packaging tape, paper, wire and cable, fiber optic cable safety belt, leather belt, shoe Types, tapes, polymers, spring steel, stainless steel, castings, non-ferrous metals, auto parts alloy materials and other non-metallic materials and metal materials for stretching, compression, bending, tearing, 90° peeling, 180° peeling, shearing Cut, adhesion, pull-out force, elongation and other tests. Host specifications
Details 白箭头 黑箭头
ZY-500N Mask Tensile Machine
The ZY-500N mask tensile machine is an instrument used to test the mechanical properties of materials such as stretching, peeling, tearing, and H extraction. It is widely used in rubber, plastic, textile, chemical, steel wire, hose tape, wire and cable, plastic, pipe and other industries. It is a high-precision, economical and practical instrument.
Details 白箭头 黑箭头
ZY-500N Mask Tensile Machine
The ZY series mask tensile machine is used to measure the tensile properties of various masks. The appearance of this machine is novel and generous. Computer digital speed control system, equipped with force sensor and automatic elongation tracking device, good stability. Electrical appliances use PC and interface circuit boards to collect, store, process and print test results. The maximum force, yield force, average peel force, maximum deformation and other basic physical properties of the material can be calculated. During the test, the microcomputer collects the force value and deformation signal in real time, and the software displays the "force value-displacement" curve. After the test, it automatically calculates and saves the parameters, and can print out the report form the user needs. 2. Structural principle The host is composed of an electronic speed regulation system, a transmission mechanism, a force measurement system and an extension automatic tracking device. Electronic speed control system: The machine adopts AC speed control, corresponding to the stretching speed of 1-Xmm/min (X is the user's bottom request), and returns at high speed. Elongation tracking device: This device is used to measure the deformation of the sample. It can be tracked by an external tracker or a built-in tracker. It can also be tracked by the deformation device built in the motor without the tracker. 3. Main technical parameters 1. Force resolution: 0.001-0.1N 2. System accuracy: less than ±0.1 3. Maximum test force: 500N 4. Accuracy level: 0.5 5. Test force measurement range: 1-99% 6. Test force indication error: less than or equal to 0.3% 7. Test force resolution: 0.001 8. Displacement resolution: 0.001 9. Displacement indication error: less than or equal to 0.5% 10. Speed ​​range: 0-500mm/min (special requirements can be customized) 11. Large stroke of gripper: 800mm 12. Elongation tracking error: ±0.1mm 13. Power supply voltage: AC220V±10% 50Hz 14. Net weight: 120KG Four, characteristics Automatic clearing: After the computer controls the test command, the system automatically clears; High intelligence: After the test, the fracture is automatically judged and the fixture automatically returns to the initial position Multi-function: different fixtures can be replaced to carry out different tests; Automatic shift: switch to different grades according to the size of the load; Change speed: the test speed can be changed arbitrarily Control method: Test methods such as test force, test speed, displacement and strain can be selected. Powerful: Record test data throughout the process. Provides functional services such as saving, comparison and tracking. The mouse can be used to arbitrarily find out the point-by-point force value and deformation data analysis of the test curve, and it can be partially enlarged and compared. Multiple protection: with automatic limit and automatic overload protection. Automatic calculation: automatically calculate various test results, and can modify the report arbitrarily Automatic length measurement: equipped with a high-precision encoder, automatically measuring the displacement stroke and elongation between punctuation. High taste: finely crafted, smooth lines, coupled with high-precision software and hardware technology and integration capabilities, reflecting the exquisite manufacturing technology and dexterity. Five, configuration 1. Single column type. 2. One high-precision sensor 3. Japan Omron high-precision photoelectric automatic tracker 4. The testing machine software has functions of automatic calculation, storage, comparison, etc. 5. High precision control drive system 6. High precision closed loop motor 7. German Thomson ball screw 8. Synchronous belt wheel transmission, no noise, no vibration, stable operation 9. 1 special test fixture 10. 19-inch Lenovo LCD computer, HP color printer.
Details 白箭头 黑箭头
ZY-5000N plastic electronic tensile machine (double column digital display)
ZY-5000N plastic electronic tensile machine is an instrument used to test the mechanical properties of materials such as stretching, peeling, tearing, and H extraction. It is widely used in rubber, plastic, textile, chemical, steel wire, hose tape, wire and cable, plastic, pipe and other industries. It is a high-precision, economical and practical instrument.
Details 白箭头 黑箭头

News

Yangzhou Zhengyi Testing Machinery Co., Ltd.

Service Hotline: 

Add:

Address: Zhenxing North Road, Zhenwu Town, Jiangdu District, Yangzhou City, Jiangsu Province

Copyright: Yangzhou Zhengyi Testing Machinery Co., Ltd.      苏ICP备14021115号-4        Powered by:www.300.cn